The FL32A-2 from Liberty Pumps is an Automatic Effluent Pump w/ Wide Angle Float Switch, 1/3HP, 25' cord, 208/240V. The Liberty FL32A-2 submersible effluent sump pump has a discharge of 1-1/2" NPT. It also has a turn-on level of 12" and shut-off level of 5". This submersible effluent/sump pump has a motor that is enclosed in a cast-iron housing and a 25' power cord. The Liberty Pump FL32A-2 features vortex style impeller made of high temperature engineering polymer, which allows for 3/4" solids handling..

The minimum pit diameter on this sump/effluent pump is 14" in sump conditions and 18" in effluent conditions. This sump/effluent pump can handle liquids up 140F and has a 19' shut off head The Liberty FL32A-2 was specifically designed for STEP Systems, LPP Systems, Mound Systems, Liquid Waste Transfer and Commercial Sump Applications. This pump should not be run dry.

Features:

• Vortex impeller, made of high temperature engineering polymer, permits passage of solids without clogging;
• 416 stainless steel rotor shaft;
• Oil-filled, thermally protected motor;
• Unitized shaft seal;
• 1-1/2" FNPT discharge;
• Quick-disconnect 25' standard power;

Technical Specifications:

• Horsepower: 1/3 HP;
• Cord length: 25';
• Discharge: 1-1/2" FNPT;
• Solids Handling: up to 3/4";
• Shut-off Head: 19';
• Voltage: 208-230V;
• Amps: 6.6;
• Hertz: 60 Hz;
• Phase: 1;
• Maximum fluid temperature: 140°F;
• Height: 9.6";
• Width: 9.8";
• Weight: 32 lbs.;
• Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
• Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;