-3%
Zoom
An innovative product based on Stiebel Eltron's existing technology, MegaBoost unit allows to drastically reduce hot water recovery time and increase hot water output when coupled with an existing tank (storage) type water heater - no need to install a larger one! For example, MegaBoost installed on the cold water inlet of a 30-gallon storage heater would offer a whopping 71% increase in hot water, while installed on a hot water outlet, would offer a 54% increase. This unit is a great solution for when more hot water volume is needed, without removing or replacing an existing tank.
Technical Specifications:
Features:
Technical Specifications:
- Voltage: 240V (hardwired)
- Output: 9.6kW
- Amperage: 40A
- Min. recommended curcuit breaker size: 40A
- Water Connections: 1/2" Male NPT
- Min. activation flow rate: 0.264 gpm
- Nominal water volume: 0.13 gal
- Max. inlet water temperature: 131F
- Working pressure: 150 psi
- Tested to pressure: 300 psi
- Dimensions (Height x Width x Depth): 14-3/16" x 7-1/8" x 4-1/8"
- Weight: 5.9 lb
Features:
- Boost existing hot water production by over 70%
- Speed up recovery time by up to 385%
- Can be installed on cold water inlet or hot water outlet
- An economical solution which does not require removing or replacing existing water heater
- Saves money by preventing increased stand-by losses of a larger replacement storage heater
- Water temperature can easily be adjusted via the dial on the front of the MegaBoost
- Made in Germany