The SJ10A from Liberty Pumps is a SumpJet Water Powered Backup Sump Pump w/ Alarm. The Liberty Pump SJ10A is not intended to be used as the main sump water removal pump. The Liberty SJ10A requires no electricity to be operated and serves as a emergency back-up to an existing pump system during power outages. This back-up system is fully automatic and uses the municipal water supply to evacuate water from the sump. It accepts 20PSI to 100PSI inlet supply pressure.

This sumpjet has a compact design and high-output flow rates. It removes 2 gallons of sump water for every 1 gallon used. It comes fully-assembled and is equipped with a SharkBite push-type fitting inlet. This fitting can be used with various approved 3/4-inch portable water tubing and pipe, such as PEX tubing, copper pipe, or copper tube size CPVC pipe. The sumpjet is intended to remove clear sump water only. It is not designed to remove waste water, sewage, effluent, or water with debris in it. The Liberty Pump SJ10A needs an uninterrupted water source to operate and will not operate in the event of power outages.

A garden hose should not be used with this sumpjet. They are not designed to hold municipal pressure indefinitely and could leak or burst, causing flooding. The Liberty Pump SJ10 has a foot valve installed so there is no need for a check valve on the discharge.

Features:

• Pre-mounted Alarm. 120V with 9V battery backup
• Accepts 20PSI up to 100PSI inlet supply pressure
• Fully automatic
• High-output flow rates
• Compact design
• Fully-assembled
• 1-1/2" Discharge
• Works off municipal water supply
• 3/4 " NPT water inlet connection
• UPC approved (IAPMO PS 119-2005)
• SHARKBITE inlet connection accepts pex, copper or CTS CPVC 3/4" line
• Adjustable stainless hose clamp for easy mounting
• Removes 2 gallons of water for each 1 gallon used. (based on 5' lift)
• Fully assembled, compact design
• Built-in screen with removable foot valve
• Constructed of durable PVC
   

Technical Specifications:

• Inlet Connection: 3/4" SHARKBITE fitting
• Discharge Size: 1-1/2"
• Maximum fluid temperature: 130°F
• Major Height: 21.6"
• Major Width: 5.1"
• Weight: 3.5 lbs.
   

Warranty: 

• 3 years manufacturer's warranty