-14%
Zoom
The LE41A-2 from Liberty Pumps is an Automatic Sewage Pump w/ Wide Angle Float Switch, 4/10HP, 25' cord, 115V. The turn-on level for this submersible sewage pump is approximately 12" to 16" above the bottom of the basin. The turn off level is approximately 6" above the bottom of the basin.
The Liberty Pump LE41A-2 has a shut-off head of 19' and a discharge of 2" FNPT. It can handle solids up to 2" and temperatures up 140F. The Liberty sewage pump motor is oil filled and thermally protected. The rotor shaft is made of 416-stainless steel and is supported by lower and upper ball bearings.
Features:
- Heavy cast iron construction;
- Oil filled, thermally protected motor;
- Permanently lubricated ball bearings;
- Corrosion resistant, vortex style impeller made of high temperature engineering polymer;
- All stainless steel fasteners and rotor shaft;
- Quick-disconnect 25' standard power cord allows replacement of cord in seconds without breaking seals to motor;
Technical Specifications:
- Horsepower: 4/10HP;
- Cord length: 25';
- Discharge: 2" FNPT;
- Solids Handling: up to 2";
- Shut-off Head: 19';
- Voltage: 115V;
- Amps: 12;
- Hertz: 60 Hz;
- Phase: 1;
- Maximum fluid temperature: 140°F;
- Height: 14";
- Width: 10.75";
- Weight: 40 lbs.;
- Minimum basin diameter: 18";
- Minimum basin depth: 24";
Warranty:
- 3 years manufacturer's warranty
| Material | |
| Cast Iron | |
| Features | |
| Wide Angle Float Switch | |
| Type | |
| Automatic | |
| Application | |
| Plumbing | |
| Voltage | |
| 115V | |
| Horse Power | |
| 4/10 HP | |
| Series | |
| LE40 | |
| Product Type | |
| Sewage Pumps | |
| Cord | |
| 25' | |
| Max Shut-Off Head | |
| 20-30 ft | |
| Max Flow @ 5' of Head | |
| 100-150 GPM | |
| Brand | |
| Liberty Pumps | |