The HT41M-2 from Liberty Pumps is a Manual High Temperature Sump Pump (200F), 25' cord, 4/10HP, 115V. This high temperature, manual submersible sump pump can handle solids up 3/4" and has a 1-1/2" FNPT discharge. It is a manual sump pump and has no switch. This sump pump has a shut-off head of 16' at 200F water temperature and 20' at 77F.
The Liberty HT41M-2 high temperature sump pumps can a reach a maximum flow of 59 GPM. The Liberty HT41M-2 sump pump is designed for hot-water applications, such as boiler blow-down pits, condensate pits and high temperature water transfer. This Liberty sump pump also has cast iron construction with all stainless and brass fasteners, and a stainless steel rotor shaft that provides ultimate performance and reliability.
Features:
- Vortex impeller, made of high temperature engineered thermoplastic, permits passage of solids without clogging
- Cast iron construction with all stainless and brass fasteners
- 416 stainless steel rotor shaft
- Oil-filled, thermally protected motor
- Permanently lubricated bearings
- Unitized shaft seal
- 25' U.L. approved power cord with quick disconnect design
- 1-1/2" FNPT discharge
Technical Specifications:
- Horsepower: 4/10 HP
- Automatic: No
- Discharge: 1 1/2" FNPT
- Solids Handling: 3/4"
- Voltage: 115V
- Phase: 1
- Full load amps: 12
- Locked rotor amps: 23
- Thermal overload temp: 302F
- Stator winding class: F
- Cord lenth: 25'
- Weight: 38 lbs
- Height: 9.6"
- Major Width: 9.8"
- Maximum fluid temperature: 200F
Warranty:
- 3 years manufacturer's warranty
| Material | |
| Cast Iron | |
| Type | |
| Manual | |
| Application | |
| Plumbing | |
| Voltage | |
| 115V | |
| Horse Power | |
| 4/10 HP | |
| Series | |
| HT40 | |
| Product Type | |
| Sump Pumps | |
| Cord | |
| 25' | |
| Max Shut-Off Head | |
| 10-20 ft | |
| 20-30 ft | |
| Max Flow @ 5' of Head | |
| 50-60 GPM | |
| 60-70 GPM | |
| Brand | |
| Liberty Pumps | |